Advertisement
REMOVAL
1. Disconnect the battery negative (-) terminal and remove the ignition key from the vehicle.
Wait at least 30 seconds.
2. Remove the door scuff trim.
3. Remove the lower anchor plate.
4. Remove the center pillar lower trim.
5. Remove the upper anchor cover and upper anchor.
6. Remove the webbing guide.
7. Remove the front seat belt assembly.
a. Never attempt to disassemble or repair the BPT.
b. Do not drop the BPT or allow contact with water, grease, oil.
Replace it if a dent, crack, deformation or rust are detected.
c. Do not place anything on the BPT.
d. Do not expose the BPT to temperature over 93°C(200°F).
e. BPT functions one time only. Be sure to replace the BPT after it is deployed.
f. Be sure to wear gloves and safety goggles when handling the deployed BPT.
seat belt pretensioner
Advertisement
