Advertisement
3. Twist second spring end to right of drive tang on shift shaft.
4. Push torsion spring and spacer together back as far as they will go.
5. Slide electric shift cam onto shift shaft, drive tang on cam first.
Position drive tang on cam so that it will go under drive tang on shift shaft and between spring ends
and slide cam as far as it will go.
ADAPTER, INPUT SHAFT AND CARRIER
1. Lay planet carrier assembly on work bench with end having groove for retaining ring up.
2. Install sun gear with hub end up. Rotate gear of planet carrier assembly as required until sun gear is
fully meshed.
3. Align tabs and install thrust plate into planet carrier assembly.
4. Install retaining ring (16) to complete gear carrier assembly.
Advertisement
