SENSOR REPLACEMENT
1. Replace the RPS if signal voltage exceeds the set value.
2. Note the followings.
(1) Always renew the sealing washer (soft iron sealing ring) even if old sensor is re-used.
(2) When removing seal, take care not to damage sealing surface.
(3) When installing RPS, provide the sealing washer with grease if necessary.
(4) Tightening torque is 35±2 N·m (25.8±1.5 Ib·ft)
Replace the faulty fuel rail assembly in case of new model vehicle within a year, or replace the
faulty parts of vehicle of which model year is more than a year.
EGR SOLENOID VALVE