7. Remove the shock absorber lower nut.
8. Remove the spring and shock absorber assembly from the vehicle as an assembly.
INSTALLATION
1. After making sure identification mark on the spring seat. Position the spring and shock absorber
assembly into the upper mounting block.
2. Install the mounting block nuts by 3-4 threads only.
3. Insure the front of the vehicle is raised and supported with safety stands.
4. Tighten the lower nut of the shock absorber.
Tightening torque :
122-140 N·m (12.2-14 kg·m, 88-101 Ib·ft)