Advertisement
16. Tighten reverse idle shaft bolt and washer on the adapter side.
Tightening torque:
43-55 N·m (430-550 kg·cm, 31-40 lb·ft)
17. Tighten three rear bearing retainer bolts with washer.
Tightening torque:
20-27 N·m (200-270 kg·cm, 14-15 lb·ft)
18. Using SST(09432-3E700), install oil seal on the adapter housing.
Apply the grease to the oil seal.
19. Install steel balls, poppet springs and interlock poppet plate.
Advertisement
