Advertisement
5. Install the lower nut of the shock absorber.
Tightening torque :
122-140 N·m (12.2-14 kg·m, 88-101 Ib·ft)
6. Install the lower nut of control link of stabilizer bar.
Tightening torque :
95-117 N·m (9.5-11.7 kg·m, 68-84 Ib·ft)
7. Install the wheels and secure the lock nuts.
Tightening torque :
90-120 N·m (9-12 kg·m, 65-86 Ib·ft)
8. Remove the safety stands and lower the vehicle.
After installation, measure the wheel alignment and adjust if necessary. Refer to "Wheel Alignment"
in this section.
INSPECTION
1. Inspect for worn or deteriorated lower arm bushings.
2. Inspect for bent, cracked or damaged lower arm.
3. Inspect for worn or damaged ball joint.
Advertisement
