11. Apply continuous 1/16 in.(1.6 mm) bead of sealant (Neutral Cure RTV, Loctite 598) all around transfer
case mounting face for front, adapter. Center sealant bead between edges of face. Circle bolt holes.
12. Install assembled adapter, input shaft and carrier group on transfer case and attach with six bolts.
Torque bolts to 20 - 34 lb·ft (27 - 46 Nm)
13. Install breather bard and torque to 6 - 14 lb·ft (8 - 19 Nm).
FRONT OUTPUT SHAFT
1. If removed, press deflector onto yoke.
2. Position output shaft in transfer case and install yoke assembly, oil seal, washer and nut.
3. Hold yoke and torque nut to 150 - 180 lb·ft (203 - 244 Nm).