Advertisement
DESCRIPTION
The Supplemental Restraint System (SRS AIRBAG) is designed to supplement the seat belts to help
reduce the risk or severity of injury to the driver and passenger by activating and deploying the driver,
passenger and curtain airbag (side airbag) as well as the belt pretensioner in certain frontal or side
collisions.
AIRBAG SYSTEM
1. When removing the airbag module or handling a new airbag module, it should be placed with the pad
top surface facing up.In this case, the twin-lock type connector lock lever should be in the locked state
and care should be taken to place it so the conector will not be damaged. Do not store a steering wheel
pad on top of another one. (Storing the pad with its metallic surface up may lead to a serious accident if
the airbag should inflate accidentally.)
2. Never measure the resistance of the airbag squib. (This may cause the airbag to deploy, which is very
dangerous.)
3. Store the airbag module where the ambient temperature remains below 93°C (200°F), without high
humidity and away from electrical noise.
4. During electric welding, disconnect the airbag under the steering column near the MULTI-FUNCTION
Advertisement
