Advertisement
4WD SYSTEM DESCRIPTION
Drive type
Drive item
Electric Shift
Drive
Transfer
mode
(EST type)
Transfer
Active Torque
Drive
Transfer
mode
(ATT type)
Transfer
Drive
Drive status
mode
2H
2WD, Rear wheel
drive
4H
4WD HIGH
4L
4WD LOW
2H ←→
2WD ←→ 4WD
4H
4H ←→
4WD(H) ←→
4WD(L)
4WD(L)
2WD ←→ 4WD
AUTO
LOW
4WD LOW
4WD(H) ←→
AUTO
←→ LOW
4WD(L)
Useful condition
Use on the roadway.
a. Use on the off-road or snowy and
rainy road having slippery road
surface.
b. When turning on the roadway at low
speed, vibration and noise happens
by tight corner braking.
Use in the condition which driving force is
required like escaping from rough way
and towing.
Possible to transfer 2WD into 4WD and
vice versa at 80kph or below during
driving.
a. Necessary to stop the vehicle for
transfer.
a. M/T vehicle :
Transfer the switch after pressing the
clutch pedal.
b. A/T vehicle :
Transfer the switch after positioning
the A/T lever to "N".
b. All vehicles with 4L mode should stop
the vehicle for transfer.
a. Use on the various road surfaces
including roadway, off-road, or snowy
and rainy road haring slippery road
surface.
b. Using multiple clutch, control the
revolution difference between front
and rear wheels electronically.
So this mode can correspond to the
various road surfaces by controlling
the ATT unit automatically.
Refer to 4L of part time.
a. Necessary to stop the vehicle for
transfer.
a. M/T vehicle :
Transfer the switch after pressing the
clutch pedal.
Advertisement
