apply excessive force to it.
INSPECTION
AIRBAG MODULE
Never attempt to measure the circuit resistance of the airbag module (squib) even if
you are using the specified tester. If the circuit resistance is measured with a tester,
accidental airbag deployment will result in serious personal injury.
1. Check pad cover for dents, cracks or deformities.
2. Check the airbag module for denting, cracking or deformation.
3. Check hooks and connectors for damage, terminals for deformities, and harness for
binds.
4. Check airbag inflator case for dents, cracks or deformities.
5. Install the airbag module to the steering wheel to check for fit or alignment with the
wheel.
CLOCK SPRING
1. If, as a result of the following checks, even one abnormal point is discovered, replace
the clock spring with a new one.