Table of Contents
Advertisement
5.4.2. Editing User Preset files
The User Preset file saved on the computer is a text file containing the information for all ten user presets
for each video standard. Each video standard is contained in its own section of the file.
At the beginning of each section is a header containing the video standard, preset number and preset
name as shown below. You can edit the preset number and name to best suit your needs. Preset names
are limited to 16 alphanumeric characters. Preset numbers are restricted to the range 0 to 9.
{VIDEO 2 (1080P24PSF)
{PRESET 1 (Preset 1 load)
{OBJECT 0
1
111
62
1808
1017
...
Do not attempt to edit any other lines of the preset file, as this will corrupt the
preset values.
You must supply a name or the graticule generator will substitute a default name
when it loads the file.
5.4.3. Uploading Preset Files to the Graticule Generator
To upload a preset file to the graticule generator from the local directory
Presets that are protected may still be overwritten by uploading a user preset file.
Proceed with Caution.
1. In the command prompt window type:
2. Press the <Enter> key when prompted for a "Username".
3. Press the <Enter> key when prompted for a "Password". A message indicating that you logged in is
displayed.
4. At the "FTP>" prompt type:
generator from the local directory on the computer.
5. If the preset text file is not local to where you are performing the ftp, then include the path with the
name (For example: put c:\presets\presetfile.txt)
TECHNICAL DESCRIPTION
HD9690 Series HDTV Graticule Generator Manual
ftp xxx.xxx.xxx.xxx
put presetfile.txt
Revision 1.5
(IP address of the module)
to send the preset text file from the Graticule
Page 5-11
Advertisement
Table of Contents
