Table of Contents
Advertisement
6. Press the <Enter> key to see the main Menu.
Initialization Completed - HD9690 Running
------------------------------------------------
|
|
(HD9690-444 Desk Build b9295)
------------------------------------------------
( 1) Network Configuration
( 2) Engineering Debug Utility
(X) Exit
>
7. Press the number <1> key to enter the Network Configuration menu that is used to set the IP address
properties for the unit.
------------------------------------------------
|
Network Configuration
|
(HD9690-444 Desk Build b9295)
------------------------------------------------
----------------------------------
MAC: 00:02:c5:fe:da:34
ip address:
netmask address:
gateway:
broadcast address: 192.170.1.255
DHCP enabled: False
----------------------------------
( 1) Set IP Address
( 2) Set Netmask
( 3) Set Gateway
( 4) Set Broadcast Address
( 5) Use DHCP
(S) Save and Exit
(X) Exit
>
8. From the Network configuration menu selecting options "1" through "4" allows the user to set the
networking parameters of the unit. If this unit is running on a public LAN enabled with DHCP, then
option "5" allows the networking system to assign a non-conflicting IP address for this module. After
completing the IP configurations, save and exit this menu by selecting "S". The unit ships with DHCP
disabled (or DHCP enabled set to "FALSE"). If you are not sure whether you should use this option,
contact your networking/IT administrator.
Once you return to the Main Menu, reboot the unit so that the new settings will take effect. You can do
this using the Reboot Now menu item on the FIRMWARE menu, or you can disconnect the power to
the unit and then plug it back in.
TECHNICAL DESCRIPTION
HD9690 Series HDTV Graticule Generator Manual
Main Menu
192.170.1.1
255.255.255.0
0.0.0.0
Revision 1.5
|
|
|
|
Page 5-5
Advertisement
Table of Contents
