Table of Contents
Advertisement
15. Press the <Enter> key when prompted for a "Password". A message indicating that you logged in is
displayed.
16. At the "FTP>" prompt type
17. At the "FTP>" prompt type
indicating that you are in upgrade mode is displayed.
18. At the "FTP>" prompt type:
(For example: put HD9690_1v0b310.bin)
19. If the application file is not local to where you are performing the ftp, then include the path with the
name (For example: put c:\firmware\ HD9690_1v0b310.bin)
During this time it is mandatory that all power cycles of the unit be avoided. The
figure below displays a successful FTP session.
20. A message indicating the successful connection to the module is displayed
21. File transfer occurs in several seconds, and the DOS window displays the "FTP>" prompt again
22. At the "FTP>" prompt type
TECHNICAL DESCRIPTION
HD9690 Series HDTV Graticule Generator Manual
to turn on the progress indicator during the ftp upload.
hash
quote site upgrade
put "the name of the file.bin"
to exit the FTP procedure.
quit
Revision 1.5
to put the unit in upgrade mode. A message
to send the firmware to the unit.
Page 5-7
Advertisement
Table of Contents
