Table of Contents
Advertisement
HD9690 Series HDTV Graticule Generator Manual
5.4.
UPLOADING AND DOWNLOADING THE USER PRESETS TO A COMPUTER
To download the user presets to a computer your will need to establish an FTP connection to the graticule
generator. First you will have to configure the IP addresses in the graticule generator for use on your
network as described in sections 5.3.1.1 and 5.3.1.2.
5.4.1. Downloading Preset Files from the Graticule Generator
To download a preset file from the graticule generator to the local directory
1. In the command prompt window type:
2. Press the <Enter> key when prompted for a "Username".
3. Press the <Enter> key when prompted for a "Password". A message indicating that you logged in is
displayed.
4. At the "FTP>" prompt type
contains the values for the ten user presets. The Graticule generator responds with
successful creation of the file.
5. At the "FTP>" prompt type:
generator to the computer. The file will be saved in the local directory on the computer.
During this time it is mandatory that all power cycles of the unit be avoided. The
figure below displays a successful FTP session.
6. At the "FTP>" prompt type
221 Goodbye
Page 5-10
ftp xxx.xxx.xxx.xxx
quote site
createfile
get presetfile.txt
to exit the FTP procedure. The Graticule generator responds with
quit
Revision 1.5
(IP address of the module)
to create a text file in the Graticule generator that
to send the preset text file from the Graticule
TECHNICAL DESCRIPTION
to indicate
200
Advertisement
Table of Contents
