Table of Contents
Advertisement
HD9690 Series HDTV Graticule Generator Manual
This menu item sets how the aspect ratio and size calculations for the mask and grid objects are
calculated. In either setting, the mask and grid objects can be positioned all the way out to the production
aperture. When you choose one of the automatic aspect ratios for the mask object, its initial size and
position will be calculated with respect to the mask aperture setting.
Select prod when you want to use the production aperture as the reference for the mask and grid object
aspect ratio and size.
Select clean when you want to use the clean aperture as the reference for the mask and grid object
aspect ratio and size.
4.2.2. Choosing the Raster limits for the Box Size Calculation
Box apert =
prod
This menu item sets how the size percentage calculations for the box object are calculated. In either
setting, the box object perimeter can be positioned all the way out to the production aperture.
Select prod when you want to use the production aperture as the reference for the box object size
calculation.
Select clean when you want to use the clean aperture as the reference for the box object size calculation.
4.2.3. Choosing the Object Blink Time
Obj blink =
short
This menu item sets how long objects blink when they are selected.
Select long when you want a selected object to blink for twenty seconds before it reverts back to being
displayed continuously.
Select short when you want a selected object to blink for three seconds before it reverts back to being
displayed continuously.
Select none when you want to disable object blinking.
4.2.4. Choosing How Line Numbers are Displayed
Ln disp =
int rel
When the selected video standard uses an interlaced raster, this menu item changes the format that the
front panel display uses to show line numbers.
Select int rel to view line numbers in an interlaced relative format. In this format lines are numbered
relative to the beginning of each field and shown with their field number. (E.g. in 1080 line video, line 21F1
is the first line of active video in field 1; line 21F2 is the first line of active video in field 2)
Page 4-6
clean
long
none
int abs
DESKTOP CONTROL PANEL OPERATION
Revision 1.5
Advertisement
Table of Contents
