Serial EEPROM board
Serial EEPROM socket
Pin 1
M1
Figure 7.6 Installing Serial EEPROM Board
7.5
Host PC Interface
This emulator (HS3664EPI62H) incorporates a USB interface circuit as the host PC interface. The specifications
of this emulator comply with USB 1.1 (full speed) and can also be connected to a USB 2.0 host computer.
Connecting the attached USB interface cable to the host computer enables a direct connection between the host
computer and the emulator. Thus connection of the USB interface adapter for the E6000 (such as
HS6000EIU02H) is no longer necessary. To use a host PC interface other than USB (PCI, PCMCIA, or LAN),
prepare a corresponding host PC interface board for the E6000 separately sold and connect it to the emulator.
Note, however, that the USB interface will not be available if a PC interface cable is connected to the emulator.
To enable the USB interface function, disconnect the PC interface cable from the emulator. The USB interface is
®
also not available with the Windows NT
environment.
179