Changing The Memory Map Setting - Renesas H8 Series User Manual

5.1.5

Changing the Memory Map Setting

Clicking the [Add...] button on the [Memory Mapping] dialog box or clicking the [Modify...] button after
selecting the information on the memory map setting you want to change opens the [Edit Memory Mapping]
dialog box.
Use this dialog box to change the address range and attributes of a memory map.
[From]: Enter the start address of the map range.
[To]: Enter the end address of the map range.
[Setting]: Enter the memory map setting.
The choices given are listed below. The User (external memory) and Emulator (emulation
memory) attributes can be modified.
•
On-chip Read-write (Cannot be changed)
•
On-chip Read-only (Cannot be changed)
•
On-chip Guarded (Cannot be changed)
•
User Read-write (Cannot be selected when the single chip mode is selected.)
•
User Read-only (Cannot be selected when the single chip mode is selected.)
•
User Guarded
•
Emulator Read-write
•
Emulator Read-only
•
Emulator Guarded
Figure 5.5 [Edit Memory Mapping] Dialog Box
43