8.1.12
Searching for a Trace Record
While using the emulator, the [Trace Find] dialog box has the following pages:
Table 8.12 [Trace Find] Dialog Box Pages
Page
[General]
[Address]
[Data]
[R/W]
[Area]
[Status]
[Probes]
[Timestamp]
8.1.13
Trace Filtering Function
While using the emulator, the [Trace Filter] dialog box has the following pages:
Table 8.13 [Trace Filter] Dialog Box Pages
Page
[General]
[Address]
[Data]
[R/W]
[Area]
[Status]
[Probes]
[Timestamp]
Description
Sets the range for searching.
Sets an address condition.
Sets a data condition.
Selects the type of access cycles.
Selects the area being accessed (not available when a time stamp is
acquired).
Selects the status of a bus (not available when a time stamp is acquired).
Selects the status of four probe signals (not available when a time stamp
is acquired).
Specify the time stamp value for bus cycles (only available when a time
stamp is acquired).
Description
Selects the range for filtering.
Sets address conditions.
Sets data conditions.
Selects the type of access cycles.
Selects the area being accessed (not available when a time stamp is not
acquired).
Sets the status of a bus (not available when a time stamp is not
acquired).
Selects the states of four probe signals (not available when a time stamp
is not acquired).
Specifies the time stamp value for bus cycles (only available when a time
stamp is acquired).
195