Viewing The Assembly-Language Code - Renesas H8 Series User Manual

5.2.3

Viewing the Assembly-Language Code

If you have a source file open, right-click to open the pop-up menu and select the [View Disassembly] option to
open a Disassembly view at the same address as the current Source view.
It is also possible to view the disassembly using the new integrated [Disassembly view] in the source file.
If you do not have a source file, but wish to view code at assembly-language level, then select one of the
following operations:
Click on the View Disassembly toolbar button (
Choose the [View -> Disassembly...] menu option.
Press Ctrl + D.
The [Disassembly] window opens at the current PC location.
In this window, the following information is shown on the left as information lines.
•
1st column (Event column): Event information (break)
•
2nd column (EXT.2 Trigger column): EXT.2 Trigger information
•
3rd column (S/W Breakpoints - ASM column): PC and breakpoint information
This window is used in the same way as the source code window.
48
).
Figure 5.8 [Disassembly] Window