Table of Contents
Advertisement
E2 Lite
1.2
System Configuration
The E2 Lite is used by connecting it to the target MCU mounted on the user system.
Figure 1.1 shows the configuration of the E2 Lite system.
USB interface cable
(1) E2 Lite (this product)
(2) USB interface cable (included)
(3) 14-pin user-system interface cable (included)
20-pin to 20-pin user-system interface cable; type name: RTE0T00020KCAC0000J (separately available)
20-pin to 10-pin user-system interface cable; type name: RTE0T00020KCAC1000J (separately available)
(4) User system
This is your application system on which the MCU for debugging is mounted.
(5) Host machine
A personal computer to control the emulator by USB interface.
1.3
PC Interface
USB Interface*
•
USB 2.0 full speed (also connectable to USB 1.1- and USB 3.0-compatible host machines)
Note: Operation with all combinations of host machine, USB device, and USB hub is not guaranteed.
R20UT3240EJ0300 Rev.3.00
May.15.20
Host machine
Figure 1.1 System Configuration of the E2 Lite
Integrated development environment
+
Emulator debugger
User interface cable
User system
E2 Lite
Page 12 of 36
Outline
- Quick Links:
- E2 Lite Hardware Configuration
Hide quick links:
Advertisement
Table of Contents
