H8/3854 series expansion board (hs3854eio60h) for e6000 emulator (12 pages)
Summary of Contents for Renesas H8/36109
Page 1
On April 1 , 2010, NEC Electronics Corporation merged with Renesas Technology Corporation, and Renesas Electronics Corporation took over all the business of both companies. Therefore, although the old company name remains in this document, it is a valid Renesas Electronics document. We appreciate your understanding.
Page 2
Renesas Electronics. Renesas Electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an application categorized as “Specific”...
Page 3
H8/36109 Group Expansion I/O Board HS36109EIO61H User’s Manual Renesas Microcomputer Development Environment System H8 Family / H8/300H Tiny Series HS36109EIO61HE Rev.1.00 2006.04...
Page 5
(iii) prevention against any malfunction or mishap. 1. These materials are intended as a reference to assist our customers in the selection of the Renesas Technology Corp. product best suited to the customer's application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corp.
Renesas Technology Corp. (including its subsidiaries, hereafter collectively referred to as Renesas) pursues a policy of continuing improvement in design, functions, performance, and safety of the emulator product. Renesas reserves the right to change, wholly or partially, the specifications, design, user's manual, and other documentation at any time without notice.
Purchaser. It is not transferable to anyone who subsequently purchases the emulator product from you. Renesas is not liable for any claim made by a third party or made by you for a third party.
Page 9
This user's manual and emulator product are copyrighted and all rights are reserved by Renesas. No part of this user's manual, all or part, may be reproduced or duplicated in any form, in hard-copy or machine-readable form, by any means available without Renesas’ prior written consent.
Page 10
• READ this user's manual before using this emulator product. • KEEP the user's manual handy for future reference. Do not attempt to use the emulator product until you fully understand its mechanism. DEFINITION OF SIGNAL WORDS This is the safety alert symbol. It is used to alert you to potential personal injury hazards.
Page 11
Observe the precautions listed below. Failure to do so will result in a FIRE HAZARD and will damage the user system and the emulator product or will result in PERSONAL INJURY. The USER PROGRAM will be LOST. 1. Do not repair or remodel the emulator product by yourself for electric shock prevention and quality assurance.
Page 12
Thank you for purchasing this H8/36109 group expansion I/O board (HS36109EIO61H; hereinafter referred to as the expansion I/O board) for the E6000 emulator. The expansion I/O board enables user systems for Renesas’ original microcomputer H8/36109 group to be developed using an H8/36109 group E6000 emulator (HS3664EPI61H or...
Section 1 Overview ...1 Environment Conditions ... 1 Supported MCUs and User System Interface Cable ... 1 Operating Voltage and Frequency Specifications... 2 Components ... 3 Section 2 Connection Procedures ...5 Using Emulator without Connecting User System ... 5 Using Emulator with Connecting User System through User System Interface Cable ... 6 Section 3 User System Interface Circuit...9 Section 4 Notice ...11 Notes on Accessing Registers ...
The H8/36109 group E6000 expansion I/O board (hereinafter referred to as the expansion I/O board) is an efficient software and hardware development support tool for application systems using timer RC, timer RD, SCI3, and AD converter (ports D to H are shared), which are dedicated additional functions of the Renesas’...
Table 3 Operating Voltage and Frequency Specifications MCU Type Operating Voltage (V) H8/36109 group 3.0 to 5.5 4.0 to 5.5 For details on the operating voltage and frequency specifications, refer to the MCU hardware manual. Operating Frequency Range (φ) (MHz)
Components Figure 1.1 shows the HS36109EIO61H expansion I/O board appearance, and table 4 lists the components of the expansion I/O board. Please make sure you have all of these components when unpacking. Figure 1.1 HS36109EIO61H Expansion I/O Board Table 4 HS36109EIO61H Components No.
Section 2 Connection Procedures Always switch OFF the user system and the emulator product before the EXPANSION I/O BOARD or USER SYSTEM INTERFACE CABLE is connected to or removed from any part. Before connecting, make sure that pin 1 on each side is correctly aligned.
Using Emulator with Connecting User System through User System Interface Cable When connecting or removing the user system interface cable, apply force only in the direction suitable for connection or removal, while making sure not to bend or twist the cable or connectors. Otherwise, the cables or connectors will be damaged.
Page 20
Emulator station Expansion I/O board Cable body connector CTS screws (M3 x 6 mm) User system interface cable Figure 2.1 Connecting Expansion I/O Board to Emulator Station and User System Interface Cable...
E6000 (HS3664EPI61H or HS3664EPI62H) H8/3664 Evaluation chip Figure 3.1 User System Interface Signal Circuit (Ports D, E, F, G, and H) HS36109EIO61H 47 kΩ H8/36109 47 Ω Ports D, E, F, G, and H User system interface cable...
H8/36109 group using the H8/3664 series E6000 emulator (HS3664EPI61H or HS3664EPI62H). Do not use this expansion I/O board with any other emulator station. 2. Use the H8/36109 group user system interface cable (HS36109ECF61H for FP-100A or HS3109ECH61H for FP-100U). Do not use any other series of user system interface cable.