E30A Emulator User's Manual
1.2 System Configuration
The E30A emulator is used connecting the target MCU that mounted on the user system. Figure 1.1 shows a configuration of
the E30A emulator.
Host Machine
Figure 1.1 E30A emulator system configuration
(1) E30A Emulator (this product)
(2) AC adapter (included)
(3) USB 2.0 high-speed cable (included)
(4) 50Ω coaxial cable (included)
(5) User system:
This is your application system using the MCU to be debugged. The emulator cannot supply power to the user system. Get
a power supply separately.
(6) Host machine:
This is a personal computer to control the emulator by USB interface.
1.3 Operating Environment
-
IBM PC/AT compatibles (Windows
®
Windows Vista
32-bit editions *
*1: Windows and Windows Vista are either registered trademarks or trademarks of Microsoft Corporation in the United
States and/or other countries.
*2: The 64-bit editions of Windows Vista
1.4 PC Interface
1
-
USB interface *
USB 2.0 high-speed (also connectable to the USB 1.1-compatible host machine)
*1: Operation with all combinations of host machine, USB device and USB hub is not guaranteed for the USB interface.
R20UT0422EJ0501 Rev.5.01
Mar 15, 2016
AC Adapter
USB 2.0 High Speed
®
1
7 64-bit editions *
, Windows
1
2
®
*
, Windows
XP 32-bit editions *
®
and the 64-bit editions of Windows
50Ω Coaxial Cable
E30A Emulator
®
1
7 32-bit editions *
1
2
®
*
, Windows
2000 *
®
XP are not supported.
1. Outline
User System
,
1
)
Page 13 of 65