Selecting The Interface To Be Connected - Renesas H8 Series User Manual
Microcomputer development environment system
Hide thumbs
Also See for H8 Series:
- Hardware manual (697 pages) ,
- User manual (408 pages) ,
- Hardware manual (442 pages)
Table of Contents
Advertisement
5.1.3
Selecting the Interface to be Connected
Checking [Change driver in start up] on the [Configuration Properties] dialog box allows a selection of the driver
next time the emulator is connected.
[Driver]:
Selects the driver that connects the High-performance Embedded Workshop and the emulator.
[Details]:
Sets the details of the driver being connected.
[Interface]:
[Channel]:
[Configuration]: Driver setting.
[Configure...]:
[Change driver in start up]:
Checking this box selects the driver when the emulator is connected the next time.
Figure 5.3 [Driver Details] Dialog Box
The name of the interface to be connected. This should not be changed in this
emulator.
Channel for the selected interface. This should not be changed in this emulator.
A dialog box for setting will be displayed when the driver supports the configuration
dialog. Note that this item is not available with this emulator.
41
Advertisement
Table of Contents
