Husqvarna FE 350 2014 Repair Manual page 127

ENGINE
18
Mount the throttle valve b ody.
Position and tighten hose clip Ci) .
Plug in connector (D .
Position the protection cap.
Plug in connector @ .
Plug in connector @) .
Mount the spark plug connector.
Position the clutch slave cylinder with the gasket.
@).
Mount and tighten screws
Guideline
I
Screw, clutch slave cylinder
Mount the chain.
Connect the chain with connecting link � .
Position the engine sprocket cover.
48.
Mount and tighten screw
I Guideline
Screw, clutch slave cylinder
41.
Mount and tighten screw
I Guideline
Remaining screws , chassis
Mount spring �.
1 10Nm(7.41bfft)
M6
M6 1 10 Nm (7.4 lbf ft)
I
M8 25 Nm (18.4 lbf ft)
125
I