Mask, Fender; Removing The Front Fender; Installing The Front Fender - Husqvarna FE 350 2014 Repair Manual

13

MASK, FENDER

13.1 Removin the front fender
Preparatory work
-
Switch off all power consumers and switch off the engine.
-
Remove the headlight mask with the headlight. (,... p. 85)
Main work
-
Disconnect plug-in connectors
8.
Remove screws
- Take the brake line and wiring harness out of the brake line guide.
-
Remove screws @).Take off the fender.
Main work
-
Position the front fender. Mount and tighten screws
I Guideline
Remaining screws, chassis
-
Position the brake line and wiring harness in the brake line guide.
Mount and tighten screws
I Guideline
Remaining screws, chassis
-
Connect plug-in connectors
Finishing work
-
Install the headlight mask with the headlight. (,... p. 85)
-
Check the headlight setting. (,... p. 118)
O
of the turn signals.
0-
8-
I
M6
8
of the turn signals.
84
10 Nm (7.4 lbf ft)
10 Nm (7.4 lbf ft)