Checking The Transmission - Husqvarna FE 350 2014 Repair Manual

ENGINE
18
Guideline
Use soft jaws
O
-
Remove stop disk and 1st-gear idler gear @.
-
Remove needle bearing (D.
C,.
-
Remove stop disk
-
Remove 6th-gear sliding gear
-
Remove stop disk Cs).
-
Remove lock ring @.
-
Remove 3rd-gear idler gear@.
-
Remove needle bearing
-
Remove 4th-gear idler gear Gi).
-
Remove needle bearing
48
-
Remove stop disk and lock ring G).
-
Remove 5th-gear sliding gear
-
Remove lock ring 41).
-
Remove stop disk Ci).
-
Remove the 2nd-gear idler gear
-
Remove needle bearing Gi).
18.4.39

Checking the transmission

Condition
The transmission has been disassembled.
O
-
Check needle bearings
»
If there is damage or wear:
-
Change the needle bearings.
-
Check the pivot points of main shaft
»
If there is damage or wear:
-
Change the main shaft and/or countershaft.
-
Check the tooth profiles of main shaft @ and countershaft (D for damage and wear.
»
If there is damage or wear:
-
Change the main shaft and/or countershaft.
-
Check the pivot points of idler gears
@).
@).
48.
G,.
«I.
for damage and wear.
8
and countershaft (D for damage and wear.
C,
for damage and wear.
305013-10
165