Installing The Piston - Husqvarna FE 350 2014 Repair Manual

ENGINE
18
18.5.20

Installing the piston

-
Shift the joint of the piston rings by 120
-
Place the special tool on the oiled piston. Compress the piston rings using the
special tool.
I
Piston ring mounting tool (60029015000) (,... p. 261)
✓ The piston rings are pushed together all the way.
302642-10
-
Position the piston on the cylinder using the special tool.
-
Push the piston carefully into the cylinder from above.
Info
The piston rings should not catch or they will be damaged.
303078-10
-
Ensure that piston mark
-
Apply a thin layer of sealing compound in area G).
I
Loctite 591 O
®
-
Place the cylinder base gasket on.
Info
Ensure that the dowel pins are seated properly.
-
Cover the engine case opening with a cloth. Thread the timing chain through the
chain shaft. Mount the piston pin.
• Info
I
In order to present them more clearly, the following steps are shown with a
removed piston.
-
Position the piston pin retainer.
°
.
fj
faces the exhaust side.
178