Rear Wheel; Removing The Rear Wheel - Husqvarna FE 350 2014 Repair Manual

WHEELS
14

Rear wheel

14.6
14.6.1

Removing the rear wheel

(D
-
Press out bearing using a suitable tool.
Info e
•
I
Spacing tube
-
Remove the spacing tube.
0
-
Press out bearing using a suitable tool.
-
Press in the new bearing
• Info
I
Only press the bearing in via the outer ring; otherwise, the bearing will be
damaged when it is pressed in.
C,.
-
Position spacing tube
-
Press in the new bearing
• Info
I
Only press the bearing in via the outer ring; otherwise, the bearing will be
damaged when it is pressed in.
-
Grease the new shaft seal rings
Finishing work
-
Install the front wheel. ('r p. 88)
Preparatory work
-
Raise the motorcycle with a lift stand.(,... p. 11)
can be pushed aside.
0
all the way using a suitable tool.
(D
all the way using a suitable tool.
8 O
and and press in until they are flush.
90