Husqvarna FE 350 2014 Repair Manual page 129

ENGINE
18
Remove the fixation and position the subframe.
• Info
I
Watch out for the intake flange.
Mount and tighten screws �.
Guideline
Screw, subframe
Remove screw �.
Mount and tighten screw �.
Guideline
Screw, subframe
Repeat these steps on the opposite side.
Mount vent hose.
G,.
Position hose clamp
Plug in connector �.
Position the protection cap.
Position and tighten hose clip
M8 35 Nm
(25.8 lbf ft)
M8 35 Nm
(25.8 lbf ft)
@).
127
Loctite 2701
® TM
Loctite ® 2701 TM