Husqvarna FE 350 2014 Repair Manual page 79

12
FUEL TANK, SEAT, TRIM
Main work
O
-
Unplug connector of the fuel pump.
-
Pull the hose off the fuel tank breather on the tank lid.
-
Thoroughly clean the plug-in connection of the fuel line with an air line.
• Info
I
Dirt should not be allowed to get into the fuel line under any
circumstances. Dirt in the fuel line clogs the injection valve!
-
Disconnect the plug-in connection of the fuel line.
• Info
I
Remaining fuel may run out of the fuel pipe.
8.
-
Mount wash cap set
I
Wash cap set (81212016100)
(FE 350 EU/ AU)
-
Disconnect the connector of the horn.
8
-
Remove screws with the collar bushings and horn.
(FE 350 US)
8
-
Remove screws with the collar bushings.
C,
-
Remove screw with the rubber bushing.
-
Pull both spoilers off of the sides of the radiator bracket and lift off the fuel tank.
77