Storz IMAGE1 S CONNECT Instructions For Use Manual page 38

16. Tap the Capture button to apply settings for capturing the live image.
17. Use Image Capture Preview Mode to set how the frozen image or live image is to be
displayed.
18. If AIDA is connected, select full screen.
19. If AIDA is connected via KS HIVE, select the video input being used in AIDA Video Input
(available with AIDA software version 1.7 and higher). To do this, turn on KS HIVE device
integration, see chapter Network [p. 40].
20. Set the resolution of the captured image in JPEG Resolution.
21. In Freeze/Capture Preview Time, set whether and how long the image is to remain frozen.
22. In Print During Capture, set whether to create a printout during capture.
23. In Copies, set the number of printouts.
24. In Images per page, set the number of images to be printed per page.
25. In Video Icon, set a permanent or temporary display of a video icon during video
recording.
26. Tap the Frequency button to select the image refresh rate between 50 and 60 Hz.
27. Tap the Network button to call up the network parameters and configure the network
settings, see chapter Network [p. 40].
28. Tap the Insufflation button and, in the dashboard, select the insufflator functions that can
be set in the Live menu.
29. Tap the Display button to configure the display settings, see chapter Display (Setup
menu) [p. 39].
30. Tap the Date + Time button to set the date, time, and display format.
31. Tap the Contact Information button to store the institution name and contact information.
The contact information can be accessed via the Help function on the dashboard.
Instructions for use • IMAGE1 S • 705LZA_EN_V2.1_05-2022_IFU_FDA
Application
38