Setup Menu - Storz IMAGE1 S CONNECT Instructions For Use Manual

6.3 Setup menu

In the Setup menu, the general settings and the LINK-specific settings can be changed and
saved as a preset. If the 2D image is displayed, no menu structure appears in the image.
1. Open the Setup menu using one of the following options:
2. Press the Setup button on the dashboard.
3. Press and hold the center camera head button in the Live menu for 7 seconds.
4. Press the SHIFT+ENTER shortcut on the keyboard.
5. Press and hold the left side button on the IMAGE1 PILOT in the Live menu for 7 seconds.
6. Tap the Presets button to perform the following actions:
– Store the current settings as presets
– Load stored presets
– Delete stored presets
– Apply default settings
7. To amend the LINK-specific settings, tap a displayed LINK module.
8. Tap the Camera Keys button to assign functions to the camera head or videoendoscope
buttons.
9. Tap the Setup button and set which visualization modes are to appear in the S-menu.
Instructions for use • IMAGE1 S • 705LZA_EN_V2.1_05-2022_IFU_FDA
Application
36