7.
Insert the OR1 patch cable into the KS HIVE/LAN interface.
8.
Connect the other end of the cable to a KS HIVE-compatible product, e.g., Power LED
Rubina (TL400), AIDA (WD300, WD350), OR1 HIVE router (WO10307).
9.
Connect the IMAGE1 S 4U-LINK (TC304US) and Power LED Rubina (TL400) to a sync
cable if the products are being used with the TIPCAM1 Rubina.
10. Connect the monitor. For the IMAGE1 S CONNECT (TC200US), connect the primary
work screen to DVI 1.
11. Ensure that the monitor supports a resolution of 1,920 x 1,080 pixels.
12. If the D3-LINK module (TC302US) is used in conjunction with a 3D videoendoscope,
connect a compatible 3D monitor.
13. For the IMAGE1 S CONNECT II (TC201US) connect the primary work screen to DP 1.
14. Ensure that the monitor supports a resolution of 3,840 x 2,160 pixels.
Instructions for use • IMAGE1 S • 705LZA_EN_V2.1_05-2022_IFU_FDA
Preparation
26