Repairing the product .......................... 17 Disposing of the product ........................ 17 9 Accessories and spare parts ........................ 18 Recommended accessories ........................ 18 Spare parts list ............................ 18 9.2.1 Recommended accessories ...................... 19 10 Subsidiaries.............................. 20 Instructions for use • TAKE-APART Forceps With Double Sheath • ILQ958_EN_V1.0_03-2021_IFU_CE-MDR...
Read the instructions for use of the combinable products carefully and follow all the safety notes and warnings. 1.3 Scope These instructions for use are valid for TAKE-APART instruments consisting of a handle, outer sheath, inner sheath, and working insert. Components of TAKE-APART instruments, length 20, 30, 36 cm...
Designates a possible imminent risk. If this is not avoided, it could lead to minor injuries. NOTICE ATTENTION Designates a possibly harmful situation. If this is not avoided, the products could be damaged. Instructions for use • TAKE-APART Forceps With Double Sheath • ILQ958_EN_V1.0_03-2021_IFU_CE-MDR...
NOTES, and in transanal procedures. Forceps are designed for short-term use in surgically invasive procedures. Handle Handles are for using take-apart operating instruments in laparoscopic surgery, gynecology, and urology, in diagnostic and operative thoracic surgery, thyroid surgery (extracervical access), in NOTES, in transanal procedures, and in arthroscopy. Handles are designed for short-term use in surgically invasive procedures.
Do not use damaged products. 3.5 HF applied parts HF applied parts can injure patients, users, and third parties if there is unintentional contact. Do not place HF applied parts on the patient. Instructions for use • TAKE-APART Forceps With Double Sheath • ILQ958_EN_V1.0_03-2021_IFU_CE-MDR...
3.9 Working in the field of vision Using the product outside the field of vision can cause injury to tissue or can damage the product. Only use the product in the field of vision. Instructions for use • TAKE-APART Forceps With Double Sheath • ILQ958_EN_V1.0_03-2021_IFU_CE-MDR...
If pointed and sharp products are not disposed of in suitable waste containers, there is a risk of injury and infection. Dispose of pointed and sharp products only in suitable waste containers. Instructions for use • TAKE-APART Forceps With Double Sheath • ILQ958_EN_V1.0_03-2021_IFU_CE-MDR...
Unlock button for working insert LUER lock cleaning port Unlock button for inner sheath Sliding carriage Working insert Inner sheath Outer sheath Knurled screw Example: Fully assembled TAKE-APART instrument Instructions for use • TAKE-APART Forceps With Double Sheath • ILQ958_EN_V1.0_03-2021_IFU_CE-MDR...
Product description 4.2 Possible combinations The individual components in TAKE-APART instruments can be combined with one another as indicated in the tables provided in the “Scope” chapter, with the intended use taken into account. Interface Interface description HF cable TAKE-APART instruments (5 mm, 4-part) can be used with the...
(EU) 2017/745. A code number after the CE mark indicates the responsible notified body. 4.5 Ambient conditions There are no special transport and storage conditions for this product. Instructions for use • TAKE-APART Forceps With Double Sheath • ILQ958_EN_V1.0_03-2021_IFU_CE-MDR...
Attach the outer sheath to the handle and tighten the knurled screw. Insert the inner sheath into the outer sheath and slide it into the carriage slide holder as far as it will go. Instructions for use • TAKE-APART Forceps With Double Sheath • ILQ958_EN_V1.0_03-2021_IFU_CE-MDR...
Page 14
Press the working insert unlock button and insert the working element as far as it will go into the connecting piece. It should not be possible to turn the working insert when it is in the sheath. Instructions for use • TAKE-APART Forceps With Double Sheath • ILQ958_EN_V1.0_03-2021_IFU_CE-MDR...
6.1 Using TAKE-APART instruments Application with HF current The TAKE-APART instrument can be connected to an HF generator via the HF connection. KARL STORZ recommends the use of the TAKE-APART instruments with HF devices from the AUTOCON® range from KARL STORZ.
Disassembly 7 Disassembly 7.1 Disassembling the product Hold the TAKE-APART forceps by the jaws of the working insert and by the connecting piece behind the handle. Press the unlock button for the working insert on the connecting piece and simultaneously pull out the working insert toward the front.
8 Maintenance, servicing, repairs, and disposal 8.1 Repairing the product Repair work may only be performed by KARL STORZ or by a company authorized by KARL STORZ. The interventions described in this instruction manual are exempt from this rule. Please contact your local KARL STORZ subsidiary or authorized dealer (see the list of subsidiaries).
22 mm pin distance 9.2 Spare parts list Item no. Designation 6011590 Sealing cap, for LUER lock irrigation port 7072390 Sealing cap, diameter 2.8 mm, package of 10 5917800 O-ring Instructions for use • TAKE-APART Forceps With Double Sheath • ILQ958_EN_V1.0_03-2021_IFU_CE-MDR...
28.58 mm 26176LW Bipolar high frequency cable, length 300 cm, pin distance on unit side 22 mm, for use on high frequency surgical units with bipolar sockets with a 22 mm pin distance Instructions for use • TAKE-APART Forceps With Double Sheath • ILQ958_EN_V1.0_03-2021_IFU_CE-MDR...