CAUTION
Image and function malfunctions!
Incorrectly connected camera connections can cause image interference and malfunctioning.
Ensure that the camera connector is always attached properly and securely before
starting the procedure.
1.
Turn the product on using the power switch.
ð The connected LINK modules start automatically.
2.
Format the USB storage device as FAT 32.
3.
Connect the USB storage device to the IMAGE1 S CONNECT to store still images or
videos. Do not connect more than 1 USB storage device.
4.
Check the values set for the primary source and the secondary source.
5.
Check the layout.
6.
Insert the camera head connector into the socket of the relevant LINK module.
Instructions for use • IMAGE1 S • 705LZA_EN_V2.1_05-2022_IFU_FDA
Preparation
28