23. Tab the Zoom button to enlarge or reduce the display.
24. Select Adaptive Zoom in the menue Zoom . The menu is available if the following
products are connected:
–
IMAGE1 S CONNECT II (TC201US) and a 4U-LINK in combination with 4U camera heads
(TH120 or TH121)
–
IMAGE1 S CONNECT (TC200US) or IMAGE1 S CONNECT II (TC201US) and a D3-LINK in
combination with a 4 mm TIPCAM1 S 3D
–
IMAGE1 S CONNECT (TC200US) or IMAGE1 S CONNECT II (TC201US) and a X-LINK in
combination with a CMOS-based X-Line videoendoscopes
–
IMAGE1 S CONNECT (TC200US) or IMAGE1 S CONNECT II (TC201US) and a X-LINK in
combination with HX camera heads (TH110, TH111)
25. Select Enabled .
ð The system detects the size of the endoscopic image. With small telescopes, the
endoscopic image is zoomed to vertically fill the display. If the endoscopic image
crosses the vertical boundaries, the display zooms to full screen.
ð In the case of camera heads, the adaptive zoom function is used by means of the
white balance function.
26. Tab the Image Flip button to flip the image vertically or horizontally or rotate it through
180°.
27. Tab the Camera Keys button to assign functions to the camera head or videoendoscope
buttons.
28. Tab the IMAGE1 PILOT button to assign functions to the IMAGE1 PILOT buttons.
29. Tab the Exit button to exit the Live menu. Alternatively, press the ESC key or right side
button on the IMAGE1 PILOT.
Instructions for use • IMAGE1 S • 705LZA_EN_V2.1_05-2022_IFU_FDA
Application
33