Storz IMAGE1 S CONNECT Instructions For Use Manual page 32

4. On the Memory/Eject button, read off the amount of used storage space on the
connected USB storage device.
5. On the Memory/Eject button to eject the USB storage device. Data may be lost if the
USB storage device is not ejected.
ð The USB storage device can be removed.
6. Tab the Preset button.
7. To select a preset, define presets in the Setup menu.
8. When using presets in conjunction with 3D settings, switch manually between 2D and 3D
if necessary.
9. Tap the Video button to start or stop a video recording.
10. Tab the Image button to capture a still.
11. Connect a USB storage device to save the images and videos.
12. Connect a printer to print the images.
13. Connect AIDA to display and save the images and videos.
14. Tab the OPAL1 button to set the fluorescence imaging, see chapter OPAL1 [p. 34].
15. Tab the Enhance button to set the S-Technologies, see chapter Enhance (S-
Technologies) [p. 34].
16. Tab the White Balance button to perform the white balance.
17. Tab the Light Source button.
18. Turn the light source on or off and set the light intensity and the mode.
19. If the light sources are connected via KS HIVE, activate KS HIVE device integration, see
chapter Network [p. 40].
ð If two or more light sources, camera heads, or videoendoscopes are connected at the
same time, no light source settings can be made.
ð The light source tile remains active if one OPAL1-compatible and one non-OPAL1-
compatible camera head are used.
20. Tab the Insufflator button.
21. In the Insufflator menu, adjust the settings for Gas, Flow and Pressure.
22. Tab the Display button, see chapter Display (Live menu) [p. 35].
Instructions for use • IMAGE1 S • 705LZA_EN_V2.1_05-2022_IFU_FDA
Application
32