Preparing For Uninstallation; Performing Upgrade; Tasks To Be Performed After Upgrade; Restoring Operational Environment From Previous Version - Fujitsu ETERNUS SF Express V16.6 Migration Manual

See
Refer to "Before Installation" in "Installation of ETERNUS SF Manager" in the ETERNUS SF Installation and Setup Guide for this version
for details.
3.1.1.5

Preparing for Uninstallation

Refer to "A.7 Unsetting Up

3.1.2 Performing Upgrade

Refer to "C.1 Procedures for Upgrade Installation of Manager Feature of Express / Storage Cruiser / AdvancedCopy Manager Version 14.x
and 15.x (for Windows)" to perform the upgrade.
Information
When the Upgrade Installation terminates in an error, perform recovery by following the steps outlined below.
1.
Install the target version.
2.
If the installation is successfully completed, continue from

3.1.3 Tasks to Be Performed After Upgrade

3.1.3.1

Restoring Operational Environment from Previous Version

With the following procedure, restore the Express operational environment of the previous version.
Note that if step 1 and step 2 have already been performed, perform from step 3.
1.
Log on to the server using Administrator privileges.
2.
Insert the DVD-ROM "ETERNUS SF SC/ACM/Express Mediapack for Windows (Manager Program) (1/2)" for this version into the
DVD-ROM drive.
Refer to "DVD-ROM Contents" in the ETERNUS SF Installation and Setup Guide for this version for information on the DVD-ROM
structure and detailed contents.
3.
Implement restoration of the previous version.
Execute the following batch file. For backupDir, specify the directory in which the backup data is stored with an absolute path. For
tmpDir, specify a directory in which to temporarily place the files related to the performance management function with an
absolute path. When the files related to the performance management function is not backed up, it is unnecessary to specify a
directory for the tmpDir.
dvdromDrive:\Manager_windows\vuptools\esfpostinst.bat backupDir [tmpDir]
When the restore fails, after confirming the output error message and removing the cause of the failure, execute the batch again.
Point
-
Spaces and the characters " | : * ? / . < > , % & ^ = ! ; ( ) are not supported for directory names.
-
The number of characters in a directory name must be up to 220.
4.
Eject the DVD-ROM.
5.
Restart the service of ETERNUS SF Manager
Execute the following batch file:
$INS_DIR\Common\bin\Start_ESFservice.bat
Database" to perform the repository database unsetup of the previous version:
"3.1.3 Tasks to Be Performed After
- 14 -
Upgrade".