Fujitsu ETERNUS SF Express V16.6 Migration Manual page 266

Point
If the upgrade was terminated abnormally, refer to
Solaris, Linux)" to recover the system to the normal state.
10.4.2.4 Tasks to Be Performed After Upgrade (Primary Node)
The tasks below need to be performed.
When the AdvancedCopy Manager's agent upgrade has been completed for the primary node, perform the following procedure.
If multiple Managed Server transactions exist, perform this procedure on each primary node for Managed Server transaction.
Edit the following environment setting files for Managed Server transaction on the shared disk for shared data:
-
<Mount point of shared disk for shared data of Managed Server transaction>/etc/opt/swstorage/clsetup.ini
-
<Mount point of shared disk for shared data of Managed Server transaction>/etc/opt/swstorage/swstg.ini
Change the version information within each file, as follows.
Upgrade Patterns
Version 16.0 to 16.6
Version 16.1 to 16.6
Version 16.2 to 16.6
Version 16.3 to 16.6
Version 16.4 to 16.6
Version 16.5 to 16.6
Note
Do not change anything other than the version information.
10.4.2.5 Performing Upgrade (Secondary Node)
Perform the upgrade for the secondary node.
The upgrade procedure is the same as that for the primary node. Refer to
Point
If this secondary node acts as a primary node for other Managed Server transactions, it is upgraded as a primary node, so this procedure
is not needed.
10.4.2.6 Upgrade with Silent Installation Tasks (Secondary Node)
Perform the upgrade with silent installation for the secondary node.
The upgrade with silent installation procedure is the same as that for the primary node. Refer to
Installation Tasks (Primary
"11.3.6 In Case of Problem During Upgrade of AdvancedCopy Manager's Agent (for
Descriptive Contents of Version Information
Before
Version=V16.0
Version=V16.1
Version=V16.2
Version=V16.3
Version=V16.4
Version=V16.5
Node)".
After
Version=V16.6
"10.4.2.2 Performing Upgrade (Primary
- 242 -
Node)".
"10.4.2.3 Upgrade with Silent