Fujitsu ETERNUS SF Express V16.6 Migration Manual page 265

4.
Install the AdvancedCopy Manager's agent.
Execute the following commands for the silent installation to install the AdvancedCopy Manager's agent. For installLogFile,
specify the file in which to output installation log with an absolute path. It is optional to specify for installLogFile.
# environmentDir /acmagtsilentinstall.sh [-l <installLogFile>]
The environmentDir is as follows.
Solaris
Red Hat Enterprise Linux 5 (for x86)
Red Hat Enterprise Linux 5 (for Intel64),
using the Symfoware linkage function
Red Hat Enterprise Linux 5 (for Intel64), not
using the Symfoware linkage function
Red Hat Enterprise Linux 6 (for x86)
Red Hat Enterprise Linux 6 (for Intel64)
Red Hat Enterprise Linux 7 (for Intel64)
Point
-
If nothing is specified for installLogFile, an install log file named "acmagtsilentinstall.log" is created in /var/tmp directory.
-
If there is any file of the same name as the specified install log file, it is overwritten.
-
It is required to specify an existing directory with write permission for the directory in which to store the install log file. If it
has no write permission, no error message is output in the command prompt or screen and the process terminates with error.
Note
-
If an invalid option is specified, its corresponding error message is output in the install log file and the process exits. No error
message is output in the command prompt or screen.
-
Do not execute multiplexly the command for silent installation. If it is multiplexly executed, the command executed after
that terminates abnormally. At this time, an install log file is not created.
-
During an update, it is not possible to specify an installation parameter file for the command. In the case that a file has been
specified, the command terminates in an error.
5.
On completion of installation, a command prompt is displayed.
Execute the following commands, and then eject the DVD-ROM.
# umount dvdromMountPoint
10.4.2.3.2 Confirming Results of Upgrade with Silent Installation (Primary Node)
Check the return value from the silent installation command. If necessary, check the install log file. However, if the return value from
the silent installation command is 3 or 9, an install log file is not created. For details, refer to "Return Values for Silent Installation (for
AdvancedCopy Manager's Agent)" in the ETERNUS SF Installation and Setup Guide.
The installation result can be viewed in the install log file, too.
Open the install log file to see "ResultCode" in the ResponseResult section. In "ResultCode" is written the return value from the silent
installation command.
OS type
dvdromMountPoint/Agent_unix/AdvancedCopy_Manager/Solaris
dvdromMountPoint/Agent_unix/AdvancedCopy_Manager/rhel5_x86
dvdromMountPoint/Agent_unix/AdvancedCopy_Manager/rhel5_x64
dvdromMountPoint/Agent_unix/AdvancedCopy_Manager/rhel6_x86
dvdromMountPoint/Agent_unix/AdvancedCopy_Manager/rhel7_x86
- 241 -
Directory