Fujitsu ETERNUS SF Express V16.6 Migration Manual page 170

2.
Restore the operation environment of the previous version of the AdvancedCopy Manager's manager.
Note that if step a and step b have already been performed, perform from step c.
a.
Log on to the server using Administrator privileges.
b.
Insert the DVD-ROM "ETERNUS SF SC/ACM/Express Mediapack for Windows (Manager Program) (1/2)" for this version into
the DVD-ROM drive.
Refer to "DVD-ROM Contents" in the ETERNUS SF Installation and Setup Guide for this version for information on the DVD-
ROM structure and detailed contents.
c.
Mount the shared disk for shared data of ETERNUS SF Manager.
If it is mounted on the primary node, unmount it to mount on the secondary node.
d.
Implement restoration of the previous version.
Execute the following batch file. For backupDir, specify the directory in which the backup data is stored with an absolute
path. For tmpDir, specify a directory in which to temporarily place the files related to the performance management
function of Storage Cruiser with an absolute path. When the performance management function is not backed up, it is
unnecessary to specify a directory for the tmpDir.
dvdromDrive:\Manager_windows\vuptools\esfpostinst_cluster.bat backupDir [tmpDir] -secondary
When the restore fails, after confirming the output error message and removing the cause of the failure, execute the batch
again.
Point
-
Spaces and the characters " | : * ? / . < > , % & ^ = ! ; ( ) are not supported for directory names.
-
The number of characters in a directory name must be up to 220.
e.
Unmount the shared disk for shared data of ETERNUS SF Manager.
If it is required for the work on the primary node, mount it on the primary node.
f.
Eject the DVD-ROM.
3.
Uninstalling Symfoware
In the version level of this ETERNUS SF Manager, Symfoware is not used.
Symfoware should only be installed in cases where it was used by ETERNUS SF Manager only.
The procedures to uninstall Symfoware are stated below.
-
Uninstall Symfoware from the Add or Remove Programs or Programs and Features page.
If both Symfoware Server and Symfoware Client are installed, uninstall Symfoware Client first.
Point
-
If the ETERNUS VASA Provider was being used with the previous version
It is necessary to reinstall a version of the ETERNUS VASA Provider that supports this version.
-
If the Fujitsu ETERNUS Storage Systems Monitoring Pack was being used with the previous version
It is necessary to reinstall a version of the Fujitsu ETERNUS Storage Systems Monitoring Pack that supports this version.
9.1.2.6 Starting ETERNUS SF Manager
Perform the following procedure:
1.
Check that ETERNUS SF Manager services are started on the primary node.
If not started, use the Failover Cluster Manager to start the transactions of ETERNUS SF Manager.
- 146 -