Upgrading Storage Cruiser's Agent (For Hp-Ux, Aix) - Fujitsu ETERNUS SF Express V16.6 Migration Manual

INFO : Starting Upgrade of ETERNUS SF Storage Cruiser ...
...
INFO : Upgrade of <FJSVssage> was successful.
INFO : ETERNUS SF Storage Cruiser Agent was upgraded successfully.
If the upgrade fails, the following message is displayed.
ERROR : not privileged
or
INFO : Upgrade is terminated.
or
ERROR : Upgrading FJSVssage was failed.
4.
Eject the DVD-ROM.
# cd /
# umount dvdromMountPoint
5.
In RHEL6 environments, add the following line to any row of /etc/opt/FJSVssage/Correlation.ini:
EventMessageMarking=1
6.
Execute the following command to start the daemon:
# /opt/FJSVssage/bin/sstorageagt
7.
Perform the following operations with Web Console to reload the server information.
a.
On the global navigation tab, click Server.
The registered server list is displayed in the Main pane.
b.
On the Main pane, check the target server checkbox.
c.
On the Action pane, click Reload Conf. under Server.
When the tasks described above have been performed, the upgrade of Storage Cruiser's agent is complete.

6.6 Upgrading Storage Cruiser's Agent (for HP-UX, AIX)

The upgrade is performed as follows:
1.
Back up the Storage Cruiser's agent settings information.
No. Settings Information to Be Backed Up
1 SNMP Trap sending destination address
2 Agent definition file
3 User definition information
2.
Uninstall the previous version of the Storage Cruiser's agent.
Refer to "Uninstallation of Storage Cruiser's agent" in the ETERNUS SF Installation and Setup Guide for the relevant previous
version for details.
3.
Install this version of the Storage Cruiser's agent.
Refer to "Installation of Storage Cruiser's Agent" in the ETERNUS SF Installation and Setup Guide for this version for details.
File to Be Backed Up
/var/opt/FJSVssage/sanm.ip
All files under the /etc/opt/FJSVssage directory
/opt/FJSVssage/lib/defusr.dat
*1: If there is no file, backing up is not required.
- 84 -