Fujitsu ETERNUS SF Express V16.6 Migration Manual page 222

Required Disk Space for Previous Version
The space required to install previous version of the ETERNUS SF Manager or AdvancedCopy Manager Copy Control Module.
Refer to the following locations in the ETERNUS SF Installation and Setup Guide for the relevant previous version for
information on the required disk space.
-
When using the AdvancedCopy Manager Copy Control Module included in the ETERNUS SF Manager Program
"Operating environment of the ETERNUS SF Manager"
-
When installing and using the AdvancedCopy Manager Copy Control Module Program
"Operating environment of the AdvancedCopy Manager CCM"
7.
Performing the cluster unsetup
See
Refer to "Deletion of Cluster Environments for CCM Server Transactions" in the ETERNUS SF Cluster Environment Setup Guide for
the previous version for information.
9.7.2.2 Performing Upgrade (Primary Node)
Refer to "C.6 Procedures for Upgrade Installation of AdvancedCopy Manager Copy Control Module Version 14.x and 15.x (for Solaris,
Linux)" to perform the upgrade.
Information
When the Upgrade Installation terminates in an error, perform recovery by following the steps outlined below.
1.
Install the target version.
2.
If the installation is successfully completed, continue from
9.7.2.3 Performing Upgrade (Secondary Node)
Perform the upgrade for the secondary node.
The upgrade procedure is the same as that for the primary node. Refer to
Information
When the Upgrade Installation terminates in an error, perform recovery by following the steps outlined below.
1.
Install the target version.
2.
If the installation is successfully completed, continue from the following tasks.
After upgrading on the primary node and the secondary node, perform the cluster setup. Refer to "Preparations for Customizing CCM
Server Transactions" and "Customization for CCM Server Transactions" in the ETERNUS SF Cluster Environment Setup Guide for this
version.
9.7.2.4 Tasks to Be Performed After Upgrade (Primary Node)
The tasks below need to be performed on the primary node.
1.
Stop the CCM Server transactions.
Refer to the relevant cluster software manuals for information on stopping it.
However, the shared disk for shared data of the AdvancedCopy Manager CCM must be mounted.
"9.7.2.3 Performing Upgrade (Secondary
"9.7.2.2 Performing Upgrade (Primary
- 198 -
Node)".
Node)".