Appendix C Performing Upgrading; Procedures For Upgrade Installation Of Manager Feature Of Express / Storage Cruiser / Advancedcopy Manager Version 14.X And 15.X (For Windows) - Fujitsu ETERNUS SF Express V16.6 Migration Manual

Appendix C
C.1 Procedures for Upgrade Installation of Manager Feature of Express /
Storage Cruiser / AdvancedCopy Manager Version 14.x and 15.x (for
Windows)
There are two methods of performing the upgrade, as follows:
-
Default installation
The following configuration is used without the need to input any values.
-
Installation destination
The "systemDrive:\ETERNUS_SF" directory is used as the root location for the Program Directory, Environment Directory and
Work Directory.
-
Port numbers for the various communication services
9 port numbers are used, as follows.
Service
Web Console service
communication service 1
communication service 2
Repository service
Internal use
-
Custom installation
The upgrade is performed by manually entering the configuration information into the interface (installation destination and
communication service port numbers).
The upgrade procedure is as follows:
Note that if step 1 and step 2 have already been performed, perform from step 3.
1.
Log on to the server using Administrator privileges.
2.
Insert the DVD-ROM "ETERNUS SF SC/ACM/Express Mediapack for Windows (Manager Program) (1/2)" for this version into the
DVD-ROM drive.
Refer to "DVD-ROM Contents" in the ETERNUS SF Installation and Setup Guide for this version for information on the DVD-ROM
structure and detailed contents.
Performing Upgrading
[Port Registration] Display Name
ETERNUS SF Manager Apache service
Communications service 1
Communications service 2
Repository service
Internal Port 1
Internal Port 2
Internal Port 3
Internal Port 4
Internal Port 5 (No screen display)
Port Number
- 321 -
9855
1226
4917
15432
28005
28009
28443
24916
24917