Fujitsu ETERNUS SF Express V16.6 Migration Manual page 248

dvdromDrive:\Agent_windows\AdvancedCopy_Manager\agent\windows_x86\esfacmapreinst.bat
backupDir
[When using the 64 bit version Agent]
dvdromDrive:\Agent_windows\AdvancedCopy_Manager\agent\windows_x64\esfacmapreinst.bat
backupDir
When the backup fails, after confirming the output error message and removing the cause of the failure, execute the batch
file again.
Point
-
The characters " | : * ? / . < > % & ^ ; ! are not supported for directory names.
-
If the directory name contains any spaces, they should be surrounded by double quote characters.
e.
Eject the DVD-ROM.
10.3.2.2 Performing Upgrade (Primary Node)
Note that if step 1 and step 2 have already been performed, perform from step 3.
If multiple Managed Server transactions exist, use this procedure on each primary node for Managed Server transactions.
Note
Although the initial screen of the installer is displayed during these steps, this is not used in the Upgrade Installation. Be sure to click
Exit and end the screen.
1.
Log on to the server using Administrator privileges.
2.
Insert the DVD-ROM "ETERNUS SF SC/ACM/Express Mediapack for Windows (Agent Program and Manual)" for this version into the
DVD-ROM drive.
Refer to "DVD-ROM Contents" in the ETERNUS SF Installation and Setup Guide for this version for information on the DVD-ROM
structure and detailed contents.
- 224 -