Fujitsu ETERNUS SF Express V16.6 Migration Manual page 53

-
Performance monitoring
If the performance monitoring was performed with the previous version, refer to the following information related to the
performance monitoring with the GUI client of the previous version and record the configuration information of the previous
version.
-
Interval that obtains performance information (in seconds)
-
Performance monitoring target (only for ETERNUS Disk storage system. Minimum LUN_V, Maximum LUN_V)
-
Threshold monitoring
If the threshold monitoring was performed with the previous version, refer to the following information related to the
threshold monitoring with the GUI client of the previous version and record the configuration information of the previous
version.
-
Settings for the Threshold Monitoring time
Threshold Monitoring time (Start Time/Stop Time), Alarm Display time (Start Time/Stop Time), Alarm Display frequency
-
Settings for the Threshold Monitoring
Threshold Monitoring target, Threshold, Unit of the Threshold Monitoring time, Alarm allowable range, Alarm allowable
time, Lower limit
-
Administrator information
If the administrator was set, record the "contact information for troubleshooting" that is registered in the Storage Cruiser's
manager.
2.
Back up the Storage Cruiser's manager operational environment of the previous version.
Refer to the following sections for information on performing a backup according to OS environment.
-
A.25 Backup of Manager Operation Environment (for Windows)
-
A.26 Backup of Windows Version Manager Operation Environment (for Cluster Environment)
-
A.27 Backup of Manager Operation Environment (for Solaris, Linux)
-
A.28 Backup of Solaris/Linux Version Manager Operation Environment (for Cluster Environment)
3.
If AdvancedCopy Manager is installed, back up the AdvancedCopy Manager operational environment of the previous version.
Refer to the following table to back up the operational environment.
Server Type
Storage Management Server
Storage Management Server
which also serves as a Storage
Server
4.
If AdvancedCopy Manager Copy Control Module is installed, back up the AdvancedCopy Manager Copy Control Module
operational environment of the previous version.
Refer to "A.6 Backing Up Environment Setting
5.
If AdvancedCopy Manager and/or AdvancedCopy Manager Copy Control Module are installed, back up the definition of the license
information.
Back up the license management database of ETERNUS SF License Manager by executing the esflm backup command. Refer to
the ETERNUS SF AdvancedCopy Manager Installation and Setup Guide for the previous version for information on the command.
Example of executing the command is shown below. The file specified for backupFileName is created as a backup file.
OS
Windows "A.1 Backing Up Repository Data (for
Solaris, "A.2 Backing Up Repository Data (for Solaris,
Linux
Windows Perform the steps of
Windows)", and then perform the steps of
Management Information (for
Solaris, Perform the steps of
Linux Linux)", and then perform the steps of
Management Information (for Solaris,
Files" for information on performing a backup.
- 29 -
Reference
Windows)"
Linux)"
"A.1 Backing Up Repository Data (for
"A.3 Backing Up
Windows)".
"A.2 Backing Up Repository Data (for Solaris,
"A.4 Backing Up
Linux)".