Fujitsu ETERNUS SF Express V16.6 Migration Manual page 202

See
Refer to "Command References" in the ETERNUS SF AdvancedCopy Manager Operation Guide relevant to the OS of the
Management Server for information on the command.
3.
Perform the following operations with Web Console to reload the server information.
a.
On the global navigation tab, click Server.
The registered server list is displayed in the Main pane.
b.
On the Main pane, check the target server checkbox.
If the target server is a VM guest, check the checkbox of the VM host where the VM guest exists.
c.
On the Action pane, click Reload Conf. under Server.
Point
Once normal operation has been confirmed after the upgrade of the AdvancedCopy Manager's agent, the backup data in the backup
destination directory created in step 3-d of
9.4.2 Upgrading on Clustered Systems
Note
If Cluster Unsetup is executed after upgrading from Version 15.0B to this version, the cluster resources and scripts created by the old
version's commands starting with "stgclset" are not deleted.
9.4.2.1 Preparing for Upgrade
Point
It is recommended that you back up the following resources before starting the upgrade.
By preparing a backup, in cases when an error occurs during the upgrade installation, it is possible to return the system to its state prior
to the upgrade installation, simply by recovering (restoring) the system from the backup.
-
System (the primary node and the secondary node)
-
Shared disk for shared data of Managed Server transactions
1.
Login to the server on which to perform the tasks. Perform operations after logging in with root (superuser).
2.
Check that Managed Server transactions are stopped on the secondary node.
If not stopped, stop them on the secondary node. Refer to the relevant cluster software manuals for information on stopping it.
If multiple Managed Server transactions exist, perform this procedure on each secondary node for Managed Server transactions.
3.
Stop the Managed Server transaction on the primary node.
Stop the Managed Server transactions by referring to the relevant cluster software manuals.
However, the shared disk for shared data of Managed Server transactions must be mounted.
If multiple Managed Server transactions exist, perform this procedure on each primary node for Managed Server transaction.
4.
Execute the following command to stop the local transactions on all the nodes.
# /opt/swstorage/bin/stopacm
5.
Implement backup of the previous version with all of the nodes.
For recovery in case the upgrade fails, perform a backup of the operating environment of the previous version of the
AdvancedCopy Manager's agent.
"9.4.1.1 Preparing for Upgrade" maybe deleted.
- 178 -