Preparing For Uninstallation; Performing Upgrade (For Windows) - Fujitsu ETERNUS SF Express V16.6 Migration Manual

See
Refer to "Before Installation" in "Installation of ETERNUS SF Manager" in the ETERNUS SF Installation and Setup Guide for this version
for information on port numbers.
5.1.1.7

Preparing for Uninstallation

If AdvancedCopy Manager is installed, before starting the upgrade, the following preparation is necessary before uninstalling the
previous version.
1.
Stop the daemon (for Solaris or Linux).
Execute the following command to stop the daemon of AdvancedCopy Manager on the Management Server (Storage
Management Server).
# /opt/swstorage/bin/stopacm
2.
Execute the DB unsetup.
Refer to the following sections to perform the repository database unsetup of the previous version:
-
For Windows
"A.7 Unsetting Up
-
For Solaris or Linux
"A.8 Cancelling Repository
For Clustered Systems
For clustered systems, execute cluster unsetup before uninstallation.
Refer to "Cluster environment deletion" in the ETERNUS SF Storage Cruiser Installation Guide for the relevant previous version for
information on the cluster unsetup procedure.

5.1.2 Performing Upgrade (for Windows)

Refer to "C.1 Procedures for Upgrade Installation of Manager Feature of Express / Storage Cruiser / AdvancedCopy Manager Version 14.x
and 15.x (for Windows)" to perform the upgrade. Note the following points when you upgrade.
-
When requested to restart the computer, click No.
If Yes is clicked, the upgrade is interrupted. When re-executing the installation after a restart of the computer, the installation is
treated as new one.
-
When the uninstallation completes successfully, the Uninstallation was completed successfully page may be displayed.
Although the instruction on the page indicates the deletion of files and folders, do not delete files and folders when performing
the upgrade.
Information
When the Upgrade Installation terminates in an error, perform recovery by following the steps outlined below.
1.
Install the target version.
2.
If the installation is successfully completed, continue from
For non-clustered systems, perform
Refer to "Preparations for Customizing Management Server Transactions" and "Customization for Management Server Transaction" in
the ETERNUS SF Cluster Environment Setup Guide for this version for clustered systems. Then, perform
Upgrade" afterwards.
Database"
Settings"
"5.1.4 Tasks to Be Performed After
"5.1.4 Tasks to Be Performed After
Upgrade" afterwards.
- 31 -
Upgrade".
"5.1.4 Tasks to Be Performed After