Table of Contents
Advertisement
2
Quick Start Installation
2.1
Installing the RDX internal drive
2.1.1
Before you begin
The RDX unit ships ready to install in a standard 3.5-inch or 5.25-inch half-
height drive bay depending on the configuration you order.
2.1.2
Important Information on electro-static damage
To protect your computer and drive from electro-static damage (ESD), follow
these guidelines:
Ê Before you open your computer or remove the RDX unit from its antistatic
bag, ground yourself by touching the metal chassis of your computer or
some other grounded object. For optimal protection, use an electrostatic
grounding strap.
I
Your computer must be plugged into a grounded electrical outlet to be
properly grounded.
Ê Do not touch any printed circuit boards or electronic chips on your RDX
device or in your computer.
Ê Turn your computer and any peripheral devices off before installing the RDX
unit.
2.1.3
Preparing for installation
Dependent on the type of server, it is required to attach mounting rails to the
RDX drive. For further information, please refer to your server's "Upgrade and
Maintenance Manual".
RDX USB 3.0 QuikStor Drive
11
Advertisement
Table of Contents
