Fujitsu ETERNUS SF Express V16.6 Migration Manual page 343

Note
-
Only LF is permitted for linefeed code.
Do not use CR+LF or CR.
-
Do not use double-byte character such as double-byte space.
B.2 Installation Parameters (for ETERNUS SF Manager)
The explanation of the installation parameters described below:
Parameter Name
Installation_function
ETERNUS_SF_Manager_apache_service
Communications_service_1
Communications_service_2
Repository_service
Internal_port_1
Internal_port_2
Internal_port_3
Internal_port_4
Internal_port_5
Management_server_IP_address
esfpostgres_UID
StartService
*1: When the Management Server has two or more IP addresses, specify the IP address which is available for communicating with the
Management Server from all of the AdvancedCopy Manager's agents. (For upgrading Storage Cruiser)
*2: On installation in PRIMECLUSTER environments, specify an unregistered user ID for the system by using integer number from 100
to 59999. Specify a blank in other cases.
*3: The value set to Management_Server_IP_address is as follows.
-
When you use only the IPv4 address with the Management Server:
Set the IPv4 address used.
-
When you use only the IPv6 address with the Management Server:
Set a temporary IPv4 address (127.0.0.1 for instance).
The following operations are executed after the Upgrade Installation is completed and the IP address version of the Management
Server is changed to IPv6.
1.
Create a server information change instruction file on the Management Server. Describe only the IPv6 address as the IP
address after it changes in the server information change instruction file.
2.
Execute the stgxfwcmmodsrv command with the -f option.
/opt/FJSVswstf/bin/stgxfwcmmodsrv -f serverInformationChangeInstructionFileName
Description
When installing ETERNUS SF Manager,
set to [1].
Web Console service port number
Communications service 1 port number
Communications service 2 port number
Repository service 2 port number
Port numbers for various internal
services
Management Server IP address (*1,*3)
User ID which ETERNUS SF Manager
internally uses on installation of
PRIMECLUSTER (*2)
Automatic starting of ETERNUS SF
Manager services
- 319 -
Default Value
1
9855
1226
4917
15432
28005
28009
28443
24916
24917
None
None
yes